Thread: EBC Busa of the Month 2007 Contestant Photos

Here's one I found.

ok i will throw mine into the ring...hope you all like...

2k6 LE
illumiglo gauges with 16 color adaptor
clear alternatives w intergrated taillight
kanji logo mirror mods
40 dry shot nx express w purge, k&n air filter
tiforce full ti sumo exhaust
braided steel brake lines
aluminum sub frame
ape adjustable lowering links
tiger racing hump mod
hid 10k low beam
speedohealer w top speed recall
puig dub bubble
black rims
pingle kill switch
pazzo shorties







is this were they go?

new hids w/runnnin lights

I had been wanting to polish the frame for a while now. It has taken me three day and a HELL of alot of work, but it finally done.
I didnt know if I could add an updated photo.... but if not please just delete it.

Now if I could just remember to include the photo.....:mad:

P.

Just a few Pics of my BUS.....

This is my 99 Busa stock standard

Jim

new pics. several new updates. dash didnt get done and wont for a few months, but new spieglers, new V-6 Carozzerias, new Power Race mediums, 3" more wheelbase, ZZZ chain, Mikes Q/A cover, my preload adjusters, CRG mirror, gold bar ends, pazzos. almost done.

right.

my dreamryder inspired pic









Specifications

• Axle to Axle Wheelbase: 71"
• Seat Height: 25.75"
• Fork Rake Angle: 26 degrees
• Piston Bore: 83mm
• Piston Stroke: 63mm
• Dry Weight: 493lbs

The Powerplant:

• 1363cc Millennium Nickel Silicon Carbide Coated Cylinder
• Motorhead Performance 12mm Head Bolts
• Superfinishers II; Cases, Cylinder and Head Resurfaced
• JE 8.2:1 Compression Turbo Pistons
• Total Seal Gapless Top Rings, Diamond finish Mid's
• Poly Dynetics Polymer Coated Piston Crowns and Skirts
• Crower Titanium Big Bolt Connecting Rods
• Undisclosed Cams with Custom Grind and APE Adjustable Gears
• MTC Multi-stage Lockup Clutch
• MTC Billet Clutch Basket
• MTC Oil Pressure Relief Valve
• Canadian Mike Quick Access Cover
• Canadian Mike Billet Sprocket Cover
• MSP Billet Oil Pan, Swivel Pickup Modified for Rear Dump Pipe
• TTS of England 5th and 6th Overdrive Gears
• Schnitz Racing HD Oil Pump Gear and SS Throttlebody Valves
• Schnitz Racing Starter Support Sleeve and Billet Starter Cover
• Cometic .090" Spacer and Head Gasket w/ 12mm's Pre-Drilled
• Royal Purple Race 41 Full Synthetic Race Oil
• K&N Race Oil Filters
• Russell Inline Billet Fuel Filter
• Russell Blue Silicone FI Rated Fuel hose
• Russell 6AN and 8AN Fuel Fittings Throughout
• Jiffy-Tite Quick Disconnect Fuel Couplings
• Muzzy Aluminum Fan w/ a GSXR 1000 Auxillary Fan
• Custom Radiator by Superfinishers II
• OEM Crank and Output Shaft
• JT Steel 18, 19 & 20 Tooth Primary Drive Sprockets

Turbo System:

• MCXpress of Sweden 58/12 Intercooled Kit
• MCXpress Air-to-Air Custom Swayed Intercooler
• KKK K29 Turbo with Reworked and Recoated Impeller. 2.75" ID
• MCXpress Custom Polished Aluminum Plenum
• MCXpress Fully Adjustable Boost Controller 0-3BAR
• MCXpress Polished Secondary Fuel Rail
• Bosch Blue Primary Injectors
• Bosch Green Secondary Injectors
• TIAL 50mm Red Anodized Wastegate
• Malpassi Adjustable Blue Anodized Billet Blow-off Valve
• MCXpress Billet Scavenge Turbo Sump Pump
• Custom Blue Silicone Primary and Secondary Boost Tubing
• Custom T-clamps Used Throughout
• K&N Turbo Conical Intake Filter

Bodywork:

• Catalyst Composites Racing:
• Catalyst So-Low Glass Landspeed Cut Tank with 4 3/8" Fuel Bungs
• Catalyst Turbo SuperSport Upper and Landspeed Bellypan
• Catalyst 60 Series Front Fender
• Catalyst 4" Over Glass Solo Tailsection
• Catalyst Carbon Fiber Seat Pan, Regular Cut and HH
• Catalyst Carbon Fiber Inner Fairing Panels
• D-Ring Zeus Fasteners
• PIAA DOT Low Beam Lens
• Sportech Drag Double Bubble Windscreens

Dyno Tuning:

• Tuning by Mike Poulson at Superfinishers II, Phoenix, Az
• 504hp and 308fpt @ 29lbs boost, 30% Brake on an MJP Dyno

Chassis:

• 2002 Suzuki Hayabusa Frame
• G & M Motorsports 2-8" Adjustable, Underbraced Swingarm
• Tiger Racing Tiger Tail Aluminum Inner Fender
• Tiger Racing Billet Battery Box
• Tiger Racing Quick Release Seat & Tank Pins
• Tiger Racing Billet License Plate Hanger
• Tiger Racing Full Length Aluminum Chainguard
• Trac Dynamics Polished 4 Degree Offset Triple Tree
• Soupys Cambered Chrome-Moly Steel Adjustable Handlebars
• Gilles Fully Adjustable Billet and Carbon Fiber Rearsets
• RPM Cycle Billet Air Shifter Clevis
• Soupys 3/4" Stainless Steel Adjustable Dogbones
• Lawman Racing Aluminum Subframe
• GSXR 600 Shock Pivot
• Swingarm Mounted SS Balast, Adjustable from 30-100lbs
• Outboard Swingarm SS Balast, Adjustable from 0-160lbs

Electronics:

• MPS 8oz Bottle, CO2 Airshifter with MPS Kill Box
• MPS Billet Deadman Switch
• MCXpress Secondary Injector Controller "Silver Box"
• Volvo Secondary Controller MAP Sensor
• Dyna Shift Minder and Dash Mounted Shift Light
• Accumen Electronic Gear Indicator with Billet Housing
• Garmin GPSmap60D
• Innovate Motorsports LM1, Wideband O2 Monitor
• Innovate Motorsports LM3, Datalogging System
• Innovate Motorsports XD-16 Digital A/F Gauge
• Veypor Electronic Dash Instrumentation
• G&M Motorsports Air Shifter System
• Pingel Digital Ignition Kill Box
• Dynojet Power Commander IIIr
• Hahn MAP Sensor Retard Box
• Underseat Bosch 044 Fuel Pump
• Superfinishers II Custom Front and Rear Lighting Looms
• Autometer Liquid Filled Boost and Fuel Pressure Gauges
• Jeg's Arming Switches for Shifter and Auxiliary Fan
• Superfinishers II Custom OEM Main Loom
• Superfinishers II Wiring Harness Quick Disconnects

Brakes, Drivetrain and Suspension:

• Galfer Wave Front 320mm Rotors
• Galfer 220mm Rear Wave Rotor
• Galfer Matched Carbon Brake Pads
• Goodridge Kevlar Blue Brake Lines Front and SS Rear
• Ohlins Spring, NLR Re-Valved OEM Shock
• Carrazzeria V-6 Forged Billet Gold Anodized Wheels
• Carrazzeria Custom CNC Billet Cush Style Hub
• Carrazzeria Billet Valve Stems and Seats
• Showa 50mm Gold Forks Race Tech and Ohlins Internals
• JorNic Motorsports Billet Preload Adjusters
• Driven Assortment of All Steel Final Drive Sprockets, 36-42 Tooth
• EK ZZZ 146 Link 530 Series Chain. 11,200 lb. tensile strength
• Michelin Pilot Power Race Medium Compound 190/55/17 Rear and 120/60/17 Front

Paint, Airbrushing and Bling Bling:

• Wak Kreations, Phoenix Az; GothMog Themed Airbrush Work
• BASF Carizzma Metallic Blazing Copper Base
• BASF Copper Tint Clear
• Gold Pazzo Billet Brake and Clutch Levers
• Billet Bar Ends
• Spyder Racing Custom Chrome Billet Sidestand
• Ghost Custom Engraved Chrome Master Cylinder Covers
• Superfinishers II Modified Inverted Rear Caliper Mount
• Front and Rear Brake Rotor Titanium Fasteners
• CRG Piece of **** Bar End Mirror
• One-off Plate Frame with LED Brake/Running Light
• YoYoDyne Carbon Fiber Rear LED Turn Signals
• Lots of Chrome Covers, Bolts, Plates, Hangers...

My pics from Toronto Canada:

Thought I would give it a shoot in the contest.

Eh, what the hell...not done yet, but I can finally post pics of the thing together.

brads in heres mine

I might as well.

DSCN0186.jpg

DSCN0185.jpg

here are a couple of my photos for the contest.

side 1.jpg

carbon dash.jpg

bike 043.jpg

Here U Go.

2 busa 006.jpg

2X2 busa 003.jpg

gap9.jpg

Killboyspix 001small.jpg

Well here it goes most current pics I have of my '04 Land Rocket

2003 Busa

dont think ireally have a chance w/ all the great looking bikes you guys have but hey, im just getting it all together, so one day my friends

This is mine.

white_queen.jpg

IMG_4605s.jpg

IMG_4615.jpg

IMG_0371_small.jpg